Contact Us
Subject Matter Experts
Login
Register
Home >
Verification Academy Forum >
Verification Methodology Discussion Forum >
UVM Forum >

monitoring internal signals

5 posts / 0 new
Last post
February 1, 2012 - 2:54pm
#1
mangello
Offline
Academy Total Access User
Joined: 07/19/2011
Posts: 7
monitoring internal signals

I would like to monitor signals from a module whose signals are not available at the DUT level. What is the best way to do this?
Thanks

Top
February 1, 2012 - 3:14pm
#2
dave_59
Offline
Verification Forum Moderator
Joined: 03/10/2010
Posts: 976
Re: monitoring internal signals

See the example I posted here

http://verificationacademy.com/content/re-how-reference-some-signal-other-module

__________________

Dave Rich
Mentor Graphics
http://go.mentor.com/drich

Top
February 1, 2012 - 5:26pm
(Reply to #2) #3
mangello
Offline
Academy Total Access User
Joined: 07/19/2011
Posts: 7
Re: monitoring internal signals

Thanks, I just want to make sure that I understand. Instead of making an agent for the second module(where I am only observing the outputs) I should add this to the agent/driver that is driving into the DUT?

Top
February 1, 2012 - 9:39pm
(Reply to #3) #4
dave_59
Offline
Verification Forum Moderator
Joined: 03/10/2010
Posts: 976
Re: monitoring internal signals

That is your decision. If the driver won't work without this monitor, it should be in the same agent.

__________________

Dave Rich
Mentor Graphics
http://go.mentor.com/drich

Top
February 1, 2012 - 9:39pm
(Reply to #3) #5
dave_59
Offline
Verification Forum Moderator
Joined: 03/10/2010
Posts: 976
Re: monitoring internal signals

That is your decision. If the driver won't work without this monitor, it should be in the same agent.

__________________

Dave Rich
Mentor Graphics
http://go.mentor.com/drich

Top